Parts Washers

Our Cuda and Alkota aqueous parts washers remove grease, oil, fluid, rust and other grime from small to large machinery parts and components more efficiently, effectively and safer than manual scrubbing. Our top-load and front-load aqueous parts washers use hot water jets and detergents with corrosion-inhibiting additives to clean parts in minutes. The detergents are also biodegradable and solvent-free. Save time, money and create a safer work environment with our Cuda and Alkota cabinet washers by freeing your technicians and service providers from hand scrubbing and coming into contact with harmful chemicals.

All our Cuda and Alkota parts washers are offered in a variety of sizes, electric configurations, accommodate components of all different sizes and weight, and some of our select models offer a patented spray wash technology – eliminating a drive motor, gears and pulleys. None of our Cuda top-load or front-load parts washers have emissions and all our Cuda parts washers are certified to UL and CSA safety standards.

Learn more about our Cuda and Alkota parts washers:.

Front Load

Cuda 2530 Front Load Parts Washers
with a working height of only 30-inches and a 25-inch turntable diameter, our 2530 is the smallest of our Cuda, front-load aqueous parts washers. It delivers 50 GPM at 45 PSI to remove grease, grime and oil, has a load capacity of 500 lbs, and all models feature an automatic oil skimmer, low water shutdown and a 3 HP vertical seal-less pump. Stainless-steel models are available and all our 2530 models are certified to UL and CSA safety standards.

Product Sheet

Cuda 2840 Front Load Parts Washers
used in many applications due to its 1,000 lbs load capacity, 28-inch turntable diameter and a 3 HP vertical seal-less pump delivering 50 GPM at 45 PSI to remove grease, grime and oil. Our Cuda 2840 aqueous parts washer comes with an automatic oil skimmer and low water shutdown. Its available in stainless-steel, and all our 2840 models are certified to UL and CSA safety standards.

Product Sheet

Cuda 2848 Front Load Parts Washers
aqueous parts washer equipped with a 5 HP vertical seal-less pump producing 110 GPM at 50 PSI to remove grease, grime and oil and a 1,000 lbs load capacity. Our Cuda 2840 series front-load parts washer features a 28-inch turntable diameter, working height of 48-inches, automatic oil skimmer and low water shutdown. Our 2848 is available in stainless-steel and all models are certified to UL and CSA safety standards.

Product Sheet

Cuda 3648 Front Load Parts Washer
a larger aqueous parts washer with upgraded features such as, very durable control panel, easier to replace handle, stainless steel sump covers and external plumbing. Our Cuda 3648 parts washer also has a working height of 48-inches, a 2,500 lbs load capacity, a 113-gallon sump capacity and a 36-inch turntable diameter. Its 7.5 HP vertical seal-less pump produces 150 GPM at 50 PSI to remove grease, grime and oil. Our 3648 is available in stainless-steel and all models are certified to UL and CSA safety standards.

Product Sheet

Cuda 4860 Front Load Parts Washer
front-load part washers that is 75-inches long, 66-inches wide, 105-inches tall, and it offers an optional 12-inch height extension. Our Cuda 4860 includes a 7.5 HP vertical seal-less pump delivering 200 GPM at 50 PSI to remove grease, grime and oil, as well as, a 48-inch turntable diameter and a 156-gallon sump capacity. All models come with an automatic oil skimmer, low water shutdown and are certified to UL and CSA safety standards.

Product Sheet

Cuda 7248 Front Load Parts Washer
ideal for industrial components, our Cuda 7248 front-load parts washer features a 72-inch turntable diameter, 48-inch working height and 5,000 lbs. load capacity. It’s equipped with 7.5 HP vertical seal-less pump delivering 160 GPM at 45 PSI to remove grease, grime and oil, as well as, 200-gallon sump capacity, roll-in door, push button table jog and 2 – 9 kW heaters. All 7248 models are certified to UL and CSA safety standards.

Product Sheet

Cuda 7272 Front Load Parts Washer
the largest Cuda aqueous parts washers we offer, our 7272 series have a working height of 72-inches and a 5,000 lbs load capacity. They are perfect for large manufacturing, oil and gas and heavy equipment industries, with their 7.5 HP vertical seal-less pump producing 180 GPM at 40 PSI to remove grease, grime and oil, a 160-gallon sump capacity and a roll-in door. All our Cuda 7272 models feature an automatic oil skimmer, low water shutdown, push button table jog and 2 - 9 kW heaters and are certified to UL and CSA safety standards.

Product Sheet

Alkota Front Load Series
front load parts washers designed for easy loading and unloading, with a swing out front door. Our largest model in this series offers a load capacity of 2000 lbs, 48-inch turntable and a 60-inch working height. Our Alkota Front Load series provide 2 – 15 HP pumps delivering between 36 - 210 GPM at 40 - 65 PSI to remove grease, grime and oil. They provide a solution capacity between 25 - 250-gallons, and they offer many features, including thermometer and stainless-steel nozzles, 4.5 – 18 kW heaters and an automatic oil skimmer.

Product Sheet

Alkota Automatic Series Parts Washers
ideal for heavy-duty, continuous parts cleaning, our Alkota Automatic series aqueous parts washers offer up to 750 lbs load capacity, a working height of up to 78-inches and a turntable diameter of up to 30-inches. These parts washers deliver up to 92 GPM at up to 16 PSI to remove grease, grime and oil, and they come with an automatic oil skimmer, 50-gallon solution capacity and a 6 kW heater. Their thermostat can be set at 175 degrees Fahrenheit and their wash timer set at up to 60 minutes. Stainless-steel options are available for the cabinet, door, turntable, plumbing, parts tree and spray nozzles.

Product Sheet

Alkota Commercial Series Parts Washer
perfect for medium to heavy-duty parts washing, these front-load cabinets provide up to 7.5 HP vertical seal-less pump that delivers up to 150 GPM at up to 55 PSI to remove grease, grime and oil. Our Alkota Commercial AL3654 model is equipped with a 36-inch gear-driven turntable, 54-inch working height and 1500 lbs load capacity. These aqueous parts washers offer a 167-gallon solution capacity and an 18 kW heater. Stainless-steel options are available for the cabinet, door, turntable, plumbing, parts tree and spray nozzles.

Product Sheet

Alkota Industrial Series Parts Washer
constructed of a 10-gauge steel tank and a 12-gauge steel door, this industrial-duty, front-load parts washer offers many features for operator convenience, such as a roll-out turntable for easy loading and unloading, simple controls, brass nozzles, gasket-free door and a sloped tank floor for easier cleanout. Our Alkota Industrial series offer models that feature up 36-inch turntables, up 40-inch working height and up to 1500 lbs load capacity. They offer an up to 5 HP vertical seal-less pump that delivers up to 80 GPM at up to 55 PSI to remove grease, grime and oil. Stainless-steel options are available for the cabinet, door, turntable, plumbing, parts tree and spray nozzles.

Product Sheet

Alkota Extreme Series Parts Washer
designed for extremely heavy-duty parts washing, our Alkota Extreme series front-load cabinets and doors are constructed of 12-gauge steel, and they offer a 3500 lbs load capacity. For operator convenience, the Extreme series features simple controls, brass nozzles, gasket-free door and the tank floor slopes for easier cleanout. Our AL5072 model is equipped with 10 HP cast iron, vertical seal-less pump that delivers 60 GPM at 75 PSI to remove grease, grime and oil, and it has a 72-inch working height, a 50-inch turntable diameter and an 18 kW heater. Stainless-steel options are available for the cabinet, door, turntable, plumbing, parts tree and spray nozzles.

Product Sheet

Top Load

Cuda 2216 Series Top Load Parts Washers
compact top-load automatic parts washer that fits most commercial applications. It’s only 32-inches wide and a 16-inches high, and our Cuda 2216 offers a 500 lbs load capacity, 23-gallon sump capacity, and features low water shutdown and automatic oil skimmer. Our 2216 parts washer is equipped with a 1 HP mechanical seal with flush tube style pump that delivers 28 GPM at 30 PSI to remove grease, grime and oil. All our 2216 models are certified to UL and CSA safety standards.

Product Sheet

Cuda 2412 Series Top Load Parts Washers
entry-level top-load aqueous parts washer features a ½ HP mechanical seal with flush tube style pump that delivers 20 GPM at 22 PSI to remove grease, grime and oil. It’s only 35-inches wide and provides a 250 lbs load capacity. This 115V parts washer features a 24-inch turntable diameter with an upper drive arm that rotates the turntable, low water shut down, an automatic oil skimmer and casters. Our Cuda 2412 models are certified to UL and CSA safety standards.

Product Sheet

Cuda 2518 Series Top Load Parts Washers
easy and automated throughout, our Cuda 2518 series top-load aqueous parts washer offers a virtually maintenance-free vertical seal-less 3 HP pump delivering 50 GPM at 45 PSI to remove grease, grime and oil. Its disc oil skimmer can also be automated for disposing of oil. Standard with the 2518 parts washer is a time-tested chain drive assembly, easy access to the sump and a removable debris screen and low water shutdown. It provides 500 lbs load capacity, and all 2518 models are certified to UL and CSA safety standards.

Product Sheet

Cuda SJ Series Top Load Parts Washers
our Cuda SJ cleans parts from every angle with its patented spray wash technology – a water-propelled spray arm with 23 nozzles that spin around a stationary parts basket. This technology eliminates the need for a drive motor, gears and pulleys. Our Cuda SJ models offer a 350 lbs load capacity, 90-gallon sump capacity and a 3 HP pump motor producing 37 GPM at 30 PSI to remove grease, grime and oil. All SJ models are certified to UL and CSA safety standards.

Product Sheet

Alkota 110 Series Parts Washers
compact and ideal for smaller parts washing, our Alkota 110 top-load aqueous parts washer has a working height of 18-inches, a 24-inch turntable diameter and a 300 lbs load capacity. This 230V, top-load parts washer is equipped with a 2 HP pump that delivers 36 GPM at 40 PSI to remove grease, grime and oil, and it’s constructed of a 10-gauge tank, 12-gauge door and cabinet steel plate. Our Alkota 110 parts washers do have options, such as oil skimmer, low water shut-off, casters and 220-440V / 3 HP units.

Product Sheet

 

Hours

Monday - Friday
8:00 am - 4:30 pm

Saturday - Sunday
Closed

Locations

1325 S Bennett Ave
Tyler, TX 75701
(800) 522-8466

10720 Miller Road #210
Dallas, TX
(800) 950-6926

1013 Jeter Street
Bossier City, LA 71111
(318) 752-0102

3107 Antelope Trail, Suite #2
Midland, Tx 79706
(800) 522-8466

 
 
© Copyright Action Cleaning Systems, Inc. All rights reserved.